1024 x 768

友 倫 牌  人 字 形 ( 曲 折 縫 ) 工 業 用 縫 紉 機


01_平台式_薄料 (__下送) 02_高頭式_薄料__(__下送) 03_橫管式_薄料__(__下送) 04_曲腕式_薄料___(__下送)
05_平台式_中厚料(上下送) 06_高頭式_中厚料(上下送) 07_橫管式_中厚料(上下送) 08_曲腕式_中厚料 (上下送)
09_魚網車 10_人字貝殼形線跡滾領推景車 11_雙針人字車 12_曲腕式_中厚料 (__下送)
13_475A-2284N    14_475A-143N-L  15_475A-135-L 16_475A-345-M

A_產品一覽表

B-目錄下載區

C_凸 輪 for 475A (YULUN) 

D_凸輪 for 457A-143

 

475A-143N-L

-

平台式 曲折縫(人字形)工業用縫紉機

高 速 單 針 齒 送 料 人 字 形 鎖 式 線 跡

 

Flat Bed, Zig-Zag Industrial Sewing Machine

High Speed, Single Needle, Drop Feed, Lock Stitch

-

更 換 凸 輪  的  曲 折 縫 ( 人 字 形 ) 工 業 用 縫 紉 機  (選擇購買凸輪)

CHANGE CAMS and OPTIONAL CAMS of ZIG-ZAG SEWING MACHINE

 

 

Model :  475A-143N-L

BACK SIDE   背面 

FRONT SIDE   正面

 

  規 格    SPECIFICATIONS : 

MODEL

STITCH

PATTERN

MAX.

BIGHT

MAX.

STITCH

LENGTH

MAX.

SPEED

(S.P.M.)

APPLICATIONS
機 型 縫 紉 圖 示 最 大 擺 針 最 長 針 距 最 高 縫 速 用 途

475A-143N-L

 

 

(on click)

optional cams

8.0 mm 1.3 mm 4,200

可作裝飾縫製, 新式流行女用緊身內衣褲及襯衫之縫紉. ( 配合線跡需要而備有多種花樣凸輪供更換 ) 

It can be used for sewing modern, trendy form-fitting underwear and shirts for women.

(In matching with stitch requirements, various pattern cams are available for replacement.)

   備註 : 速度快慢視操作方式及材質而定.          Remarks: Speed depends on the materials and the type of operation.

-滑鼠點一下, 即放大圖

友倫牌 -- 專利凸輪  ( 正廠製造 )

-

線 跡 說 明 表

-  

用 途    APPLICATIONS : 

1 : 縫合花邊 , 肩帶及一般 " Z " 字形縫紉.
2 : 將鬆緊帶 或 蕾絲花邊 縫至女用緊身衣 , 泳衣等腿部或腰部.
3 : 將鬆緊帶 或 蕾絲花邊 縫至女用胸衣 , 胸罩上, 也能作為裝飾性縫紉.
4 : 緊身衣, 睡衣, 韻律裝等裝飾性縫紉.
5 : 可用來接縫各種款式的男裝高級衣褲, 裝飾性縫紉及一般牢固縫紉產品.
.
1 : Attaching laces, making shoulder straps, and general zig- zag works.
2 : Attaching elastic trim or lace to leg or waist sections of ladies' body suits, swim suits.
3 : Attaching elastic trim or lace to corsets, bras, etc. Also can work for decorative sewing.
4 : Decorative sewing for ladies' body suits, negligee, etc.
5 : For felling and joining collar on men's jacket, decorative sewing & fasten articles.
-
-

特 點   FEATURES : 

1 : 本機改進針距基線變更桿, 使落針位置的微調整變得更簡單, 且加上定位桿的作用位置固定更確實牢靠. 圖
2 : 採用了新型旋轉式挑線桿, 高低張力的縫紉均能保持張力平均.
3 : 採用偏離中心的偏心梭軸機構, 大大改善了跳針, 斷線等的故障.
4 : 可附加滾邊器及摺邊器 ( 選購配配 ). 圖
5 : 採用內藏式捲線器裝置, 使得捲線量的調節及捲線 線圈張力的調整變得簡單穩定.
6 : 人字形鬆緊帶送料裝置, 適合高級男女內衣褲之縫紉l.
7 : 螺旋式幫浦全自動供油,  加壓能力大, 高低速變化時也能保持縮子油量的安定.
8 : 新型設計的壓力調整螺絲桿, 可微調整設定壓腳壓力的輕重, 簡便穩定.
.
1 : With the improved needle position shifting lever, fine adjustment of needle location is simplified. Moreover. needle position can be fixed firmly by means of a stopper provided on the lever.
2 : New type rotary take-up ensures uniform thread tensions at low tension settings.
3 : Off-center axis hook has been adopted reducing skip stitching and thread breakage considerably.
4 : Hemmer & folder are optional.
5 : Fully improved built-in type bobbin winder makes it easier to adjust the amount of thread to be wound in bobbin and thread tension when winding bobbin.
6 : Elastic feeding device for zig-zag sewing machine, special for sewing high quality ladies' & gentlemen's underwear. ( optional )
7 : Screw pump type fully automatic lubrication system ensures stable flow of oil to the hook under pressure at all speeds.
8 : The new presser bar pressure regulating knob enables the simple adjustment of presser bar pressure.

-

  縫製範例   SEWING SAMPLES : 

Re

No

凸輪編號

CAMS NO.

說 明

DESCRIPTION

縫 紉 圖 示

STITCH PATTERN

Standard Stitch

最 大 擺 針

MAX.

PATTERN WIDTH

 

MAX.

STITCH WIDTH

1 NP-6358 12-stitch opened scallop cam

8.0 mm 2.4 mm
2 NP-6360 24-stitch crescent scallop cam

8.0 mm 3.6 mm
3 NP-6464 24-stitch even scallop cam

8.0 mm 3.4 mm
4 NP-6295 24-stitch even scallop cam

8.0 mm 2.6 mm
 

注意  :  當 你 使 用 扇 形 凸 輪 時 ,  底 線 張 力 要 調 整 緊 一 點

Note: When you use scallop cam, please regulate bobbin thread tension to be More Tension.

5 NP-6394 1-step 2-point zig-zag cam 5.0 mm -
6 NP-6462 2-step 3-point zig-zag cam

8.0 mm -
7 NP-6362 3-step 4-point zig-zag cam 8.0 mm -
8 NP-6396 Blind stitch cam (4 stitches) 5.0 mm -
9 NP-6364 Blind stitch cam (6 stitches) 5.0 mm -
10 NP-6480 Blind stitch cam (8 stitches) 5.0 mm -
11 NP-6482 Blind stitch cam (12 stitches) 5.0 mm -

-

-

-


更 換 凸 輪       動 態 示 範 如 下:

CAM DOWN 取下凸輪

Please Waiting

PLAY

 

CAM UP 裝上凸輪

Please Waiting

PLAY

 

-

 

475A-143N-L

01_平台式_薄料 (__下送) 02_高頭式_薄料__(__下送) 03_橫管式_薄料__(__下送) 04_曲腕式_薄料___(__下送)
05_平台式_中厚料(上下送) 06_高頭式_中厚料(上下送) 07_橫管式_中厚料(上下送) 08_曲腕式_中厚料 (上下送)
09_魚網車 10_人字貝殼形線跡滾領推景車 11_雙針人字車 12_曲腕式_中厚料 (__下送)
13_475A-2284N    14_475A-143N-L   15_475A-135-L 16_475A-345-M

A_產品一覽表

B-目錄下載區

C_凸 輪  for  475A  (YULUN) 

D 凸輪  for  457A-143